The Caisson Drilling Contractor Canada Relies On
Using specialty equipment and large diameter down hole hammers we are capable of boring large diameter holes which can be filled with steel reinforced concrete to distribute building loads to a competent load bearing material below the surface.
Typically caissons are used when shallower foundations such as strip footings or spread footings cannot be constructed economically or safely due to poor soil conditions. Caisson foundations can be constructed to transfer compressive loads to competent bedrock or soils. Additional capacity can be achieved in both compression and tension by creating sockets in the bedrock.
At Brewster Well Drilling we use dual rotary drills and advance steel casing is used to hold back lose material or caving soils when the water table is higher than the design depth or when soils with low cohesion are encountered. This casing can be removed after the concrete is placed or left in place depending on site conditions and design requirements.
Concrete is typically pumped in place using a 4” tremmie pipe to avoid segregation of concrete materials which could occur if the concrete is allowed to free-fall. Additionally if water is present in the caisson it is necessary to pump concrete from the bottom to displace the water and ensure the water cement ratio of the concrete is not adversely affected.
Seeking Caisson Drilling Companies? Canada Trust Brewster
If you're searching for the caisson drilling company Canadian construction contractors depend on most, start with Brewster Well Drilling. Reliable caisson contractors are sometimes hard to find, and when you do locate one, you want to make sure these specialized drillers have the necessary equipment and know-how to conform to your engineering design specifications.
Contact Us for Caisson Construction
If your construction project calls for caissons, getting started is as easy as calling our experts at Brewster Well Drilling. We have the experience, the engineering knowledge, and the tough, heavy-duty equipment necessary to construct large diameter caissons.
Contact us for caisson drilling services in, Nova Scotia, New Brunswick, Newfoundland and Labrador, West Africa, Bermuda and the Caribbean.